BURNT HOUSE / CUBASE PRO 16 / RECORDING
A convincing vocal recording begins before the record button is pressed. The room, microphone position, headphone mix, performance direction and confidence of the singer all influence the result. Cubase can organise takes and editing, but the producer still has to create the conditions for a good performance.
Prepare the session before the singer arrives
Set the tempo, create a clearly named vocal track and check the input routing. Prepare a comfortable headphone mix with enough of the instrumental to support timing and pitch without making the singer strain. If the track contains loud effects, consider a cleaner monitoring version so the performer can hear the words and pitch clearly.
Set up the audio track and microphone input in Cubase 16
- Open Studio > Audio Connections and choose the Inputs tab. Check that an input bus is assigned to the physical interface socket receiving the microphone. Create a mono input bus if you are recording one microphone; name it clearly, such as Mic 1 or Lead Vocal.
- In the Project window, choose Project > Add Track > Audio. In the Add Track dialog, select the input bus under Audio Inputs and choose a Mono channel configuration.
- Name the track before recording, for example Lead Vocal – Take 1, and confirm that its input is the bus connected to the correct microphone preamp.
- Activate Record Enable on the track. Check the input meter while the singer performs the loudest expected line, then adjust the interface preamp rather than trying to repair an overloaded recording with the track fader.
Steinberg documents the Audio Connections Inputs setup and the Add Track dialog for audio tracks.
Choose one monitoring path
For monitoring through Cubase, activate Monitor on the audio track and choose the appropriate option in Edit > Settings > Transport > Recording > Monitoring Mode. This routes the input alongside the backing track, but the performer hears it with the delay introduced by the audio driver and buffer. Keep the recording buffer low enough for comfortable monitoring and avoid adding high-latency plug-ins to the monitored path; Constrain Delay Compensation can help when recording with a plug-in chain that adds delay.
If the interface supports hardware or ASIO Direct Monitoring, you can monitor the microphone through the interface instead. Enable Direct Monitoring in Edit > Settings > Audio > Advanced if the driver exposes it, and follow the interface manufacturer’s instructions. Do not monitor the same microphone through both the hardware mixer and Cubase at once, or the singer may hear a doubled or delayed signal. Steinberg explains monitoring via Cubase and Direct Monitoring.
Record and compare several vocal takes
For a cycle-recorded section, set the left and right locators around the phrase, switch on Cycle, then choose Transport > Audio Record Mode > Cycle History + Replace. This keeps the takes from each cycle lap instead of retaining only the final pass. After recording, activate Show Lanes on the audio track to display the takes on separate lanes. Audition each pass in the context of the track and promote the strongest phrases into the comp. An audio track plays one active audio event at a time, so select the take you want to hear rather than assuming all lanes will play together.
Use Keep History when you want overlapping events from separate recordings retained, or Cycle History + Replace when recording multiple passes in cycle mode. Check the audio record modes reference and lanes and takes guide for the behaviour of each mode.
Set recording levels with headroom
Record at a healthy level without approaching digital clipping. Peaks do not need to sit close to zero. Leave headroom for expressive phrases and unexpected loud notes. If the input clips before it reaches Cubase, lowering the track fader will not repair the recorded distortion; adjust the preamp or input stage.
Make the room work for the voice
Microphone choice matters, but placement and room sound often matter more. Avoid placing the singer directly against a reflective wall. Listen for reflections, computer noise and low-frequency build-up. Use a pop filter and maintain a consistent distance. The best microphone position is the one that captures the voice naturally for that performer.
Record complete takes before chasing details
Start with full performances. A singer may deliver a stronger emotional arc when they can move through the song without stopping every line. Record several complete takes, then focus on difficult sections. Keep notes about the best moments and the reasons they work.
Comp with musical judgement
Comping combines the strongest sections from different takes. Choose phrases for emotion, timing, pitch and consistency, not simply technical perfection. Listen across the edit boundaries and use appropriate fades. A technically seamless comp can still sound emotionally disconnected if the delivery changes too much between phrases.
Edit only what needs editing
Timing correction and pitch editing can improve a performance, but over-editing can remove expression. Correct distracting problems while retaining natural movement. Compare edited and unedited versions at matched levels. If the performance loses character, reconsider the amount of correction.
Prepare the vocal for mixing
Organise doubles, harmonies and ad-libs clearly. Label printed effects and keep dry recordings available. Remove unwanted noises carefully without cutting breaths that contribute to the performance. Make sure the comp is complete and the session is saved before moving into detailed processing.
Further reading
Continue with our guide to vocal and mix automation and groups, buses and FX returns, our Cubase 16 audio setup guide and the wider vocal production guide.
Direct the performance before editing it
Give the singer a clear reason for each take. One pass might focus on the emotional meaning, another on rhythm and diction, and a third on a particular phrase. Avoid asking for endless identical takes without feedback. If a line is not working, change the direction, adjust the headphone balance or take a break. A different performance often solves a problem more naturally than detailed editing.
Build a comp that sounds like one person in one moment
Choose takes with consistent tone, distance and energy where possible. Listen to the transitions in context, not only with the edit points zoomed in. Use short crossfades to prevent clicks, but do not hide a change in room tone or vocal character with a long fade. Check breaths and consonants because they help phrases connect. If the comp sounds assembled, return to a longer phrase from one take.
Organise doubles and harmonies
Keep lead, doubles, harmonies, ad-libs and alternate takes on clearly named tracks or lanes. Decide whether doubles should reinforce the lead tightly or create a wider, looser character. Do not automatically copy the lead to create a double; a real second performance usually has a different texture. Keep the dry recordings and note which tracks have printed processing.
Prepare a clean handover to the mix
Before detailed mixing, check edits from beginning to end, remove accidental muted sections, confirm fades and label all playlists. Save a version of the session before committing to major processing. If exporting consolidated vocals, use a common start point, include the intended tails and state the tempo and sample rate. A tidy session protects the performance and makes later revisions faster.
