BURNT HOUSE / CUBASE PRO 16 / MIDI PERFORMANCE
Perfectly aligned MIDI can be useful, but it can also make a part feel like a diagram rather than a performance. The timing between notes, the way a chord unfolds and the small differences in duration all contribute to whether a musical part feels played or programmed.
Cubase Pro 16 adds MIDI Strum and Stretch tools that give producers more ways to shape note timing and chord behaviour. These tools are especially useful when turning block chords into more natural gestures, or when adjusting a phrase without manually moving every note.
How to use Strum in Cubase 16
- Open the MIDI part in the Key Editor and select the notes in the chord you want to shape.
- In the Key Editor Inspector, show the Strum section. When it is hidden, right-click an empty area of the Inspector, choose Set up Sections and activate Strum.
- Choose whether the strum should affect Note Starts or Note Ends. Start with Note Starts for a guitar-like chord attack.
- Adjust Strength to control the amount and direction of the spread. Positive values make higher notes start later; negative values make lower notes start later.
- Use Slope to change how the timing spreads across the chord. Positive values create an accelerating strum; negative values create a decelerating strum. Adjust Position to decide how the spread aligns with the original notes.
For a realistic guitar gesture, begin with a small positive or negative spread that reflects the downstroke or upstroke you want to suggest. A keyboard pad usually needs much less movement. Steinberg documents the Strum controls in its Cubase 16 Strum Section reference.
How to use Stretch Selection
- Select the MIDI notes you want to expand or compress in the Key Editor.
- Choose the Object Selection tool from the Key Editor toolbar.
- Click the Object Selection tool again and select Stretch Selection from its pop-up menu.
- Drag the start of the first selected note or the end of the last selected note to stretch or compress the selected events proportionally.
- To create a timing curve, hold Alt on Windows or Option on macOS and drag vertically at the start or end of the selection. Dragging up at the start creates a ritardando at the beginning and an accelerando at the end; dragging down at the start creates the opposite. When dragging at the end, an upward drag creates an accelerando at the start and a ritardando at the end; a downward drag creates a ritardando at the start and an accelerando at the end.
Stretch Selection can also move selected controller data with the notes when Auto Select Controllers is enabled. Snap is disabled while this mode is active. When using the vertical Alt/Option gesture, release the mouse button before releasing the modifier key. Inspect the result against the project grid before leaving the Key Editor. See Steinberg’s official Stretch Selection procedure.
Fine-tune the Strum settings
The Strum Inspector can shape both the attack and the release of a chord. These extra controls are useful when a simple spread sounds too mechanical or when you want the notes to finish in a coordinated way.
Position and direction for Note Starts
For Note Starts, positive Strength values make higher notes start later, while negative values make lower notes start later. Position determines which end of the chord stays anchored: at 100%, the lowest note remains at its original position and the higher notes are delayed; at -100%, the highest note remains fixed and the lower notes are advanced. Try both directions on a duplicate chord and choose the one that matches the part’s intended gesture.
Use Note Ends to shape the release
Activate Note Ends when you want to stagger note-off positions as well as the attack. Positive Strength makes lower notes end earlier; negative Strength makes higher notes end earlier. Max. Spread sets the maximum distance between adjacent notes. If you are only changing the starts and want the original note ends to remain fixed, activate Fixed Note Ends while Note Starts is on and Note Ends is off.
Apply or reset the result
When the timing feels right, click Apply Strum to apply the settings to the selected notes. Reset Strum returns the selected notes’ starts and ends to their original positions. This makes it easy to compare a subtle spread with a more pronounced one without rebuilding the chord by hand. Steinberg lists each control in its Strum Section reference.
Why timing inside a chord matters
A keyboard player does not always strike every note in a chord at precisely the same instant. A guitarist strums across strings, creating a small movement through the chord. These differences can add direction and character. A strum effect can help reproduce that gesture, but the amount matters. Too much delay between notes can make a chord feel sloppy or change its rhythmic function.
Start with the musical role
A sustained pad may benefit from a very subtle spread, while a rhythmic piano stab may need to remain tight. A guitar-like part may need a more obvious up or down movement. Listen to the groove and decide whether the chord should arrive as one impact or unfold across a short moment.
Stretch phrases without losing the pulse
Stretching MIDI notes can help reshape a phrase or fit a performance into a different rhythmic space. Check the note endings as well as the beginnings. Long notes can overlap and trigger unwanted legato behaviour; short notes can lose their intended articulation. Use the editor’s grid as a guide, not as a substitute for listening.
Humanise with intention
Human feel is not random imperfection. It is a controlled relationship between timing, velocity, note length and articulation. A bass line may need tight timing but varied velocity. A shaker may benefit from subtle timing variation. A chord part may need a little spread while the kick remains locked to the grid.
Compare against the groove
Solo the part briefly to inspect the edit, then return to the full arrangement. A MIDI performance can sound more natural alone but weaken the track when it no longer locks with the drums. Make small adjustments and compare at the same playback level.
Further reading
Read our guide to MIDI editing and humanising performances, alongside our guide to Instrument Stacks.
Use strumming to suggest a real gesture
Listen to how the instrument would physically produce the chord. A guitar downstroke usually has a different emphasis from an upstroke, while a keyboard chord may have a much tighter onset. The order and spacing of notes should support that gesture. Start with a subtle spread, then increase it only until the part feels intentional. If the chord begins to sound like an arpeggio, the spread may be too wide for its role.
Shape note lengths as carefully as note starts
Overlapping MIDI notes can change the behaviour of a sound, especially with monophonic instruments, legato modes or patches with long release tails. Shortening a note can create space for the next chord; extending it can help sustain a pad or string part. Check how the instrument responds rather than assuming the MIDI editor’s visual length tells the whole story.
Humanise the whole performance, not every note
Choose which elements should remain precise. A kick and sub-bass may need a firm relationship, while a guitar chord or shaker can move slightly around the grid. Vary velocity in phrases rather than applying random values to every event. A repeated pattern should contain a recognisable pulse, with small variations that make it feel performed.
